High-Quality Cable: USB-C to Lightning Cable with Smart Display offers fast and reliable charging for up to 60W. The cables are designed for resiliency and convenience with careful construction for both data (480Mbps) and power.
Digital Readout: Forget the guesswork. The cable integrates an LED digital display at one end to indicate power and charging status. Stay in charge of your iPhones, iPads, iPods, and other Apple devices.
Superior Power Delivery: Fast device charging at up to 60W is supported for even the most demanding devices. Apple MFI certification provides for superior and reliable power delivery. Compatibility is guaranteed for the best charging experience.
Rugged And Reliable: Our cables are designed to be reliably used every day. The cable ends have an aluminum shell to mitigate wear and provide a good connection. The copper-core wire inside a nylon-braided jacket protects from bends and tears, too.
USB CABLE QUALITY STANDARD ■Electric Test:
100% OPEN/SHORT/MISS WIRE TESTING
INSULATION RESISTANCE: Min 100MΩ @ DC300V/0.01S;
WITHSTAND VOLTAGE: *100 VAC/2－5S.
Conduction resistance: Type C: 20V5A Vbus<0.5V GND<0.25V
■All Material Meet The RoHS Compliant.
■High Temperature(Storage Test)
Test Temperature : 70℃
Test Time : 72 Hrs
Left it under room temperature for 4 hours after test
After the Spigen test, discuss the standard again.
■Low Temperature (Storage Test)
Test Temperature : -20℃
■High Temperature & High Humidity(Storage Test)
Test Temperature : 60℃
Test Humidity : 90%
Test Time : 8Hrs
■Thermal Shock (Storage Test)
Test Temperature : -20℃ / 30min, 70℃ / 30min
Test Cycle : 30 Cycle
Temperature Changing Time : within 5min
■USB in & out Test
Insert the USB connector within 35N strength
Test Count by connector type
USB-C, Micro-B, USB-A, Lightning : 5,000 times
■Salt Spray Test (Metal part)
Salt water concentration : 5% ± 1%
Test zone temperature : 35℃ ± 2℃
Salt water pH : 6.5 ~ 7.2
Salt water specific gravity : 1.02 ~ 1.04
Test Time : 24 hours
■Tensile test
Grabbing position : Connector
Pull out force : 40N
Test time : 1 min
■Bending Test (Connector)
Swing angle : 180degrees (Left > Right > Left = 1Cycle)
Bending radius : 20mm ~ 30mm
Rate : 15 time / min
Weight : 200g
Test Cycle
Test area : Connector
■Twist Test (mesh cable)
Swing angle : 360 degrees (Left > Right > Left = 1Cycle)
Rate : 30 time / min
Test Cycle : 5000 Cycle
Test area : Cable
